So

Prescription products · Product label record

Sodium Chloride drug information

SODIUM CHLORIDE
Hospira, Inc. · INTRAVENOUS

Product NDC: 0409-1141

Join the community
CommunityExperiencesReviewsDrug database
Source label information, not individualized medical advice. This record applies to the product and labeler shown below. Compare the exact formulation, strength and country with your package and the current source label.
Generic nameSODIUM CHLORIDE
Labeler / manufacturerHospira, Inc.
RouteINTRAVENOUS
Drug classDrug class not supplied in source label
Product NDC0409-1141
Label effective date2025-11-11

Official product label reference

Sodium Chloride — Hospira, Inc.

This page contains 17 source sections for SODIUM CHLORIDE, intravenous route. Label set af6aebad-ef03-4d19-9a40-18e5a278b812, version 8.

Retrieved 2026-10-02 · openFDA dataset updated 2026-10-02 · Check the current DailyMed label

Label records can cover multiple strengths or package sizes. A label listing does not by itself establish FDA approval or current market availability. Check the source and application history for this specific product.

Uses described in the label

INDICATIONS AND USAGE 23.4% Sodium Chloride Injection, USP is indicated for use as an electrolyte replenisher in parenteral fluid therapy. It serves as an additive for total parenteral nutrition (TPN) and as an additive for carbohydrate containing I.V. fluids.
Dosage and administration — label text
DOSAGE AND ADMINISTRATION 23.4% Sodium Chloride Injection, USP Additive Solution is administered intravenously only after addition to a larger volume of fluid. The dose, dilution and rate of injection are dependent upon the individual needs of each patient. In solutions for total parenteral nutrition (TPN), 120 mEq of sodium/day (range: 75–180 mEq/day) is the recommended adult dosage, whereas the recommended dosage is 3–4 mEq/kg/day for preterm infants. Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. Discard unused portion. Additives may be incompatible with the fluid dispensed from this container. Consult with pharmacist, if available. When admixing, use aseptic technique, mix thoroughly and do not store. Directions for Proper Use of Pharmacy Bulk Package Use Aseptic Technique 1. For hanger application, peel off the paper liner from both ends of the tape hanger to expose 3/4 in. long adhesive portions. Adhere each end to the label on the bottle. 2. During use, container must be stored and all manipulations performed in an appropriate laminar flow hood. 3. Remove cover from container and cleanse closure with antiseptic. 4. Insert suitable sterile dispensing set or transfer device and suspend unit in a laminar flow hood. The closure should be entered only once and after initial entry, the withdrawal of container contents should be completed promptly in one continuous operation. Should this not be possible, a maximum time of 4 hours from initial closure puncture is permitted to complete fluid transfer operations; i.e., discard container no later than 4 hours after initial closure puncture. 5. Sequentially dispense aliquots of 23.4% Sodium Chloride Injection, USP into intravenous containers using appropriate transfer device. During fluid transfer operations, the Pharmacy Bulk Package should be maintained under the storage conditions recommended in the labeling. 6. Inspect solution after admixing. Discard if the solution is discolored or particulates are observed.
Contraindications
CONTRAINDICATIONS 23.4% Sodium Chloride Injection, USP Additive Solution is contraindicated in patients with hypernatremia or fluid retention.
Warnings
WARNINGS 23.4% Sodium Chloride Injection, USP is hypertonic and must be diluted prior to administration. Inadvertent direct injection or absorption of concentrated sodium chloride solution may give rise to sudden hypernatremia and such complications as cardiovascular shock, central nervous system disorders, specifically osmotic demyelination syndrome, extensive hemolysis, cortical necrosis of the kidneys and severe local tissue necrosis (if administered extravascularly). Solutions containing sodium ions should be used with great care, if at all, in patients with congestive heart failure, severe renal insufficiency and in clinical states in which there exists edema with sodium retention. In patients with diminished renal function, administration of solutions containing sodium may result in sodium retention. The intravenous administration of this solution (after appropriate dilution) can cause fluid and/or solute overloading resulting in dilution of other serum electrolyte concentrations, overhydration, congested states or pulmonary edema. Excessive administration of potassium-free solutions may result in significant hypokalemia. WARNING: This product contains aluminum that may be toxic. Aluminum may reach toxic levels with prolonged parenteral administration if kidney function is impaired. Premature neonates are particularly at risk because their kidneys are immature, and they require large amounts of calcium and phosphate solutions, which contain aluminum. Research indicates that patients with impaired kidney function, including premature neonates, who receive parenteral levels of aluminum at greater than 4 to 5 mcg/kg/day accumulate aluminum at levels associated with central nervous system and bone toxicity. Tissue loading may occur at even lower rates of administration.
Adverse reactions
ADVERSE REACTIONS Sodium overload can occur with intravenous infusion of excessive amounts of sodium-containing solutions. See WARNINGS and PRECAUTIONS .
Unclassified section
CONCENTRATE CAUTION: MUST BE DILUTED FOR I.V. USE. Concentrated Solution - For use only after dilution with compatible intravenous fluids to correct sodium deficiency when oral replacement is not feasible. Glass Fliptop Vials Rx only Pharmacy Bulk Package – Not for Direct Infusion Distributed by Hospira, Inc., Lake Forest, IL 60045 USA LAB-1106-3.0 Revised: 11/2025 Logo Table text from source: | CONCENTRATE | CAUTION: MUST BE DILUTED FOR I.V. USE. | Pharmacy Bulk Package – Not for Direct Infusion
Product description
DESCRIPTION 23.4% Sodium Chloride Injection, USP Additive Solution is a sterile, nonpyrogenic, concentrated solution for intravenous administration ONLY AFTER DILUTION to replenish electrolytes. The preparations contain 23.4 g of sodium chloride (400 mEq each of Na+ and Cl - ) in Water for Injection, USP. The solution contains no bacteriostat, antimicrobial agent or added buffer. The additive may contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 5.0 (4.5 to 7.0). The specific gravity is 1.15, and the osmolarity is 8008 mOsmol/L (calc). Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. The molecular weight is 58.44 g/mol. The Pharmacy Bulk Package is a sterile dosage form which contains multiple single doses for preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION ).
Clinical pharmacology
CLINICAL PHARMACOLOGY Sodium chloride in water dissociates to provide sodium (Na + ) and chloride (Cl - ) ions. These ions are normal constituents of the body fluids (principally extracellular) and are essential for maintaining electrolyte balance. Sodium is the principal cation of extracellular fluid. It comprises more than 90% of the total cations at its normal plasma concentration of approximately 142 mEq/L. While the sodium ion can diffuse across cell membranes, the intracellular sodium is maintained at a much lower concentration than extracellular sodium through the expenditure of energy by the cell (so called "sodium cation pump"). Loss of intracellular potassium ion is usually accompanied by an increase in intracellular sodium ion. Sodium is the principal ion that determines osmotic pressure of interstitial fluids and the degree of tissue hydration. When serum sodium concentration is low, the secretion of antidiuretic hormone (ADH) by the pituitary is inhibited, thereby preventing water reabsorption by the distal renal tubules. On the other hand, adrenal secretion of aldosterone increases renal tubular reabsorption of sodium in an effort to re-establish normal serum sodium concentration. Chloride (Cl - ) has an integral role in buffering action when oxygen and carbon dioxide exchange occurs in the red blood cells. The distribution and excretion of sodium (Na + ) and chloride (Cl - ) are largely under the control of the kidney which maintains a balance between intake and output.
Precautions
PRECAUTIONS General Excessive amounts of sodium chloride by any route may cause hypokalemia and acidosis. Excessive amounts by the parenteral route may precipitate congestive heart failure and acute pulmonary edema, especially in patients with cardiovascular disease and in patients receiving corticosteroids or corticotropin or drugs that may give rise to sodium retention. Special caution should be used in administering sodium-containing solutions to patients with severe renal impairment, cirrhosis of the liver or other edematous or sodium-retaining states. Clinical evaluation and periodic laboratory determinations are necessary to monitor changes in fluid balance, electrolyte concentrations, and acid-base balance during prolonged parenteral therapy or whenever the condition of the patient warrants such evaluation. Do not use unless the solution is clear and seal is intact. Pregnancy Animal reproduction studies have not been conducted with 23.4% Sodium Chloride Injection, USP. It is also not known whether sodium chloride can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. Sodium chloride should be given to a pregnant woman only if clearly needed. Nursing Mothers It is not known whether 23.4% Sodium Chloride Injection, USP is excreted in human milk. Because many drugs are excreted in human milk, caution should be exercised when sodium chloride is administered to a nursing woman. Pediatric Use Safety and effectiveness of 23.4% Sodium Chloride Injection, USP have not been established in pediatric patients. Its limited use in pediatric patients has been inadequate to fully define proper dosage and limitations for use. Geriatric Use An evaluation of current literature revealed no clinical experience identifying differences in response between elderly and younger patients. In general, dose selection for an elderly patient should be cautious, usually starting at the low end of the dosing range, reflecting the greater frequency of decreased hepatic, renal, or cardiac function, and of concomitant disease or other drug therapy. This drug is known to be substantially excreted by the kidney, and the risk of toxic reactions to this drug may be greater in patients with impaired renal function. Because elderly patients are more likely to have decreased renal function, care should be taken in dose selection, and it may be useful to monitor renal function.
General precautions
General Excessive amounts of sodium chloride by any route may cause hypokalemia and acidosis. Excessive amounts by the parenteral route may precipitate congestive heart failure and acute pulmonary edema, especially in patients with cardiovascular disease and in patients receiving corticosteroids or corticotropin or drugs that may give rise to sodium retention. Special caution should be used in administering sodium-containing solutions to patients with severe renal impairment, cirrhosis of the liver or other edematous or sodium-retaining states. Clinical evaluation and periodic laboratory determinations are necessary to monitor changes in fluid balance, electrolyte concentrations, and acid-base balance during prolonged parenteral therapy or whenever the condition of the patient warrants such evaluation. Do not use unless the solution is clear and seal is intact.
Pregnancy
Pregnancy Animal reproduction studies have not been conducted with 23.4% Sodium Chloride Injection, USP. It is also not known whether sodium chloride can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. Sodium chloride should be given to a pregnant woman only if clearly needed.
Breastfeeding
Nursing Mothers It is not known whether 23.4% Sodium Chloride Injection, USP is excreted in human milk. Because many drugs are excreted in human milk, caution should be exercised when sodium chloride is administered to a nursing woman.
Children and adolescents
Pediatric Use Safety and effectiveness of 23.4% Sodium Chloride Injection, USP have not been established in pediatric patients. Its limited use in pediatric patients has been inadequate to fully define proper dosage and limitations for use.
Older adults
Geriatric Use An evaluation of current literature revealed no clinical experience identifying differences in response between elderly and younger patients. In general, dose selection for an elderly patient should be cautious, usually starting at the low end of the dosing range, reflecting the greater frequency of decreased hepatic, renal, or cardiac function, and of concomitant disease or other drug therapy. This drug is known to be substantially excreted by the kidney, and the risk of toxic reactions to this drug may be greater in patients with impaired renal function. Because elderly patients are more likely to have decreased renal function, care should be taken in dose selection, and it may be useful to monitor renal function.
Overdose information
OVERDOSAGE Excessive administration of 23.4% Sodium Chloride Injection, USP may result in electrolyte imbalance with water retention, edema, loss of potassium and aggravation of an existing acidosis. See WARNINGS .
Supply and packaging
HOW SUPPLIED 23.4% Sodium Chloride Injection, USP (4 mEq/mL) is supplied as follows: NDC No Type Container Dose / Volume Concentration 0409-1141-02 Pharmacy Bulk Package – Glass Fliptop Vial 400 mEq/100 mL 4 mEq/mL Store at 20 to 25°C (68 to 77°F). [See USP Controlled Room Temperature]. Table text from source: | NDC No | Type Container | Dose / Volume | Concentration | 0409-1141-02 | Pharmacy Bulk Package – Glass Fliptop Vial | 400 mEq/100 mL | 4 mEq/mL
Storage and handling
Store at 20 to 25°C (68 to 77°F). [See USP Controlled Room Temperature].

Official sources and product identifiers

Substances listed: SODIUM CHLORIDE

RxNorm identifiers: 313016

Package NDC codes

0409-1141-12, 0409-1141-02

Further research and background

These are external searches for related information. Research, encyclopedia and news articles have not been imported into this product record.

Coverage and corrections

The text is extracted from a US structured product label. Tables are represented as text where supplied; formatting and illustrations may be lost. A missing section does not mean a risk is absent. This reference has not been independently reviewed by a clinician and is not a live safety-alert service.

Source retrieved 2026-10-02. Read the source policy.